|
Cisco Exam 640-822 CCENT ICND1 - Interconnecting Cisco Networking Devices Part 1 Training
Click on the links next to the red icons below to view the free movies.
Click here to setup a login account and view all of the movies.
|
|
** These Movies Have Sound ** The Flash Plug-in is Required
|
TCP/IP |
 | TCP/IP DoD Model |
|
 | The IP Protocol |
|
 | Internet Control Message Protocol (ICMP) |
|
 | Transport Control Protocol (TCP) Part 1 |
|
 | Transport Control Protocol (TCP) Part 2 |
|
 | User Datagram Protocol (UDP) |
|
 | Dynamic Host Control Protocol (DHCP) |
|
 | Important Process/Application Layer Protocols |
|
 | IP Address Classes |
|
 | Reserved IP Addresses and Private IP Addresses |
|
Binary, Decimal, and Hexadecimal |
 | Binary Numbers, Decimal, and Hexadecimal Numbers |
|
 | Converting a Nibble to Decimal and Hexadecimal |
|
 | Converting a Byte to Decimal |
|
 | Converting a Byte to Hexadecimal |
|
 | Converting Decimal Numbers to Byte Part 1 |
|
 | Converting Decimal Numbers to Byte Part 2 |
|
 | Converting Hexadecimal Numbers to a Byte |
|
 | Converting Hexadecimal to Decimal |
|
Subnetting |
 | What is a Subnet Mask? |
|
 | Classless Inter-Domain Routing (CIDR) Part 1 |
|
 | Classless Inter-Domain Routing (CIDR) Part 2 |
|
 | Classless Inter-Domain Routing (CIDR) Part 3 |
|
 | Powers of 2 |
|
 | Default Subnets |
|
 | Subnetting Class C Addresses Part 1 |
|
 | Subnetting Class C Addresses Part 2 |
|
 | Subnetting Class C Addresses Part 3 |
|
 | More Subnetting Class C Addresses Part 1 |
|
 | More Subnetting Class C Addresses Part 2 |
|
 | More Subnetting Class C Addresses Part 3 |
|
 | Subnetting Class B Addresses Part 1 |
|
 | Subnetting Class B Addresses Part 2 |
|
 | More Subnetting Class B Addresses Part 1 |
|
 | More Subnetting Class B Addresses Part 2 |
|
 | More Subnetting Class B Addresses Part 3 |
|
 | More Subnetting Class B Addresses Part 4 |
|
 | More Subnetting Class B Addresses Part 5 |
|
 | More Subnetting Class B Addresses Part 6 |
|
 | Subnetting Class A Addresses Part 1 |
|
 | Subnetting Class A Addresses Part 2 |
|
 | More Subnetting Class A Addresses Part 1 |
|
 | More Subnetting Class A Addresses Part 2 |
|
 | IP Subnet Zero |
|
 | Determining the Subnet that an IP Address is in Part 1 |
|
 | Determining the Subnet that an IP Address is in Part 2 |
|
 | Determining the Subnet that an IP Address is in Part 3 |
|
 | Subnet Mask Scenarios and Questions Part 1 |
|
 | Subnet Mask Scenarios and Questions Part 2 |
|
 | Subnet Mask Scenarios and Questions Part 3 |
|
 | Variable Length Subnet Masks |
|
 | Variable Length Subnets Example 1 |
|
 | Summarization |
|
 | Summarization Examples |
|
 | Troubleshooting IP Addressing Problems |
|
 | Practicing Subnetting |
|
Basic Cisco IOS Router Configuration Commands |
 | Connecting to a Cisco Router |
|
 | Understanding Router Memory, POST, and Boot Sequence |
|
 | Setup Mode |
|
 | Router Modes |
|
 | Getting Help from the Command Line |
|
 | Auto Complete |
|
 | Other Shortcuts |
|
 | Using the Show Command |
|
 | History Size and Show History |
|
 | Turning Off Domain Lookup |
|
 | Logging Synchronous |
|
 | Negating a Command |
|
 | Show Running Configuration |
|
 | Show Version |
|
 | Viewing an Interface Status |
|
 | Giving an Interface an IP |
|
 | Shutdown and Turn On an Interface |
|
 | Adding an Interface Description |
|
 | Configuring an Interface Speed and Duplex |
|
 | Clearing Interface Counters |
|
 | Change Router Host Name |
|
 | Copy Running Config to Startup Config |
|
 | Viewing the Startup Config |
|
 | Setting the Clock |
|
 | Setting a Banner |
|
 | Setting the Enable and Enable Secret Password |
|
 | Setting a Password for the Console |
|
 | Setting a Telnet Password |
|
 | Setting the Auxiliary Password |
|
 | Encrypting Passwords |
|
 | Connecting to a Router with Telnet |
|
 | Configuring SSH on a Router |
|
 | Connecting to a Router with SSH |
|
 | Serial Interface Clock Rate |
|
 | Serial interface Bandwidth Command |
|
 | Telnet From Device to Device |
|
 | Using the Do Command |
|
 | Using the Pipe |
|
 | Configuring a Router as a DHCP Server Part 1 |
|
 | Configuring a Router as a DHCP Server Part 2 |
|
 | Configure DHCP Relay Agent |
|
Managing a Cisco Router |
 | Setting Up a TFTP Server |
|
 | Backup the Running-Config to TFTP |
|
 | Backup the Startup-Config to TFTP |
|
 | Backup the IOS to TFTP |
|
 | Restoring the Config From TFTP |
|
 | Restoring the IOS From TFTP |
|
 | Upgrading the IOS From TFTP |
|
 | Restoring the IOS From ROMMON Prompt |
|
 | Router Password Recovery |
|
 | Erasing the Configuration |
|
 | Using the Cisco IOS File System |
|
 | Configuration Register Values |
|
 | Using Cisco Discovery Protocol (CDP) |
|
 | Configuring the Cisco Discovery Protocol (CDP) |
|
Static IP Routing and Basic Cisco Routing Configuration |
 | Understanding IP Routing |
|
 | Viewing the Routing Table |
|
 | Configuring Static Routes Part 1 |
|
 | Configuring Static Routes Part 2 |
|
 | Configuring Static Routes Part 3 |
|
 | Removing a Static Route |
|
 | IP Routing and IP Classless |
|
 | Configuring a Gateway of Last Resort |
|
Dynamic Routing Basics |
 | Dynamic Routing Overview |
|
 | Administrative Distance |
|
 | Distance Vector vs Link State Routing Protocols and Concepts |
|
 | Routing Loops |
|
Routing Information Protocol (RIP) and Routing Information Protocol v2 (RIPv2) |
 | RIP and RIPv2 Concepts |
|
 | Classful Routing vs Classless Routing |
|
 | Contiguous Networks vs Discontiguous Networks |
|
 | Enabling RIPv2 and Configuring RIP Networks and Auto Summary Part 1 |
|
 | Enabling RIPv2 and Configuring RIP Networks and Auto Summary Part 2 |
|
 | Configuring RIPv2 Timers |
|
 | Preventing RIPv2 Updates From Being Sent Out an Interface |
|
 | Advertising a Default Route with RIPv2 |
|
 | Configuring RIPv2 Authentication |
|
 | Viewing the RIP Database and Show IP Protocols |
|
 | Debugging RIP and RIPv2 |
|
Network Address Translation (NAT) |
 | NAT Introduction and Terminology |
|
 | Configuring Static NAT |
|
 | Configuring Dynamic NAT |
|
 | Configuring PAT |
|
 | Troubleshooting NAT |
|
 | More NAT and PAT |
|
Configuring Wide Area Networks (WANS) |
 | WAN Protocols Part 1 |
|
 | WAN Protocols Part 2 |
|
 | Enabling HDLC |
|
 | Configuring PPP |
|
 | Configuring PPP Authentication |
|
 | Debugging PPP |
|
 | Understanding Frame Relay Part 1 |
|
 | Understanding Frame Relay Part 2 |
|
 | Configuring Frame Relay and a Static Frame Relay Map |
|
 | Frame Relay, Split Horizon, and Subinterfaces |
|
 | Monitoring and Troubleshooting Frame Relay |
|
Switching and Basic Cisco Switch Configuration |
 | Benefits and Purpose of Switches |
|
 | Giving a Switch an IP Address, a Default Gateway, and configuring Telnet Access |
|
 | Configuring a Switch Port Speed and Duplex |
|
 | Switch Port Modes |
|
 | Configuring Switch Port Security |
|
 | Viewing the Mac Address Table and Assigning a Static Mac Addresses |
|
Cisco Wireless Networks |
 | Wireless Intro and 802.11 Wireless Standards |
|
 | IBSS, BSS, and ESS |
|
 | Wireless Security and Encryption |
|
 | Configuring an SSID and an RF Channel and Understanding Wireless Interference |
|
 | Wi-Fi Logo |
|
Implementing and Verifiying a Cisco Network Configuration |
 | Choosing the Correct Device |
|
 | Choosing the Correct Cable |
|
 | Router Configuration Example |
|
 | Verifying Router Configuration Example |
|
 | Troubleshooting with Ping and Extended Ping |
|
 | Troubleshooting Network Diagrams |
|
Understanding Security Threats |
 | Types of Security Threats and Security Hardware |
|
 | Security Banners for Routers and Switches |
|
 | Encryption and Encrypting Passwords |
|
 | Requiring Login for User Mode |
|
Conclusion |
 | Tips for the Test |
|
|
|